Wishlist

The Nanomaster DF is an small, lightweight and easy to use CO2 inflator featuring two 16 g CO2 cartridges.Weight: 149 gSize:11 x 4,7 x 3,6 cm

Single-sided power and cadence data, built on the race-proven SPEEDPLAY Advanced Pedal System.Built on the cutting-edge SPEEDPLAY Pedal System, POWRLINK ZERO single-sided power pedal delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance by providing the visibility, adjustability and efficiencies needed to break through to the next level. Pair with the Wahoo ecosystem of smart devices for a more full picture of your data and performance, and to track, analyze, share and improve.FEATURES:+/- 1% POWER ACCURACY - Lab tested accuracy that provides a precise power measurement for all training efforts.LEFT POWER - With a single-sided power sensor, your left side power is tracked and doubled to estimate total power output no matter where you are crushing watts.CADENCE - With its internal gyroscope, POWRLINK ZERO reports out cadence data to help you identify your sweet spot effort and power output.EASY APP SET-UP - Our simple and intuitive Wahoo Fitness app offers guided instructions on how to install POWRLINK ZEROs on any bike, calibrate the pedals for accuracy, and perform firmware updates.WAHOO ECOSYSTEM COMPATIBLE - Pair POWRLINK ZEROs power meter pedals with the rest of the Wahoo Ecosystem for the most connected training experience. Track your metrics outdoors on an ELEMNT GPS Device or control indoors on a KICKR Smart Trainer for consistent data anywhere, anytime.DUAL-BAND ANT+ AND BLUETOOTH TECHNOLOGY - POWRLINK ZERO can simultaneously connect to three Bluetooth devices while broadcasting to an unlimited number of ANT+ devices.ENHANCED WALKABILITY - The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike.INTEGRATED PROFILE - POWRLINK ZERO and the SPEEDPLAY Standard Tension Cleat create a secure connection and a streamlined profile. The two form a seamless integration that aids power transfer and increases aerodynamics.3-AXIS ADJUSTABILITY - The cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float.ROTATIONAL FREE FLOAT - POWRLINK ZERO provides up to 15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency.SUPERIOR CORNERING CLEARANCE - We've adapted the best-in-class corner clearance of SPEEDPLAY Advanced Pedal System into POWRLINK ZERO. This pedal and cleat integration allows for a large degree of lean on the bike when riding tight corners. Pedal with confidence knowing your pedal won't strike the ground and leave the competition in the dust.EXCEPTIONAL DURABILITY - POWRLINK ZERO pedals offer uncompromised durability and minimal maintenance thanks to their stainless steel construction and triple-sealed bearing system.TEMPERATURE COMPENSATION - POWRLINK ZERO is tested and proven to provide accurate power data across changing temperatures that you are sure to encounter while riding.RECHARGEABLE BATTERY - Powered by a rechargeable lithium battery, POWRLINK ZERO power pedals have a battery life with up to 75 hours.STANDARD TENSION CLEAT - OWRLINK ZERO pedals include a set of Standard Tension Cleats and cleat surrounds for an aerodynamic profile and walkable system.EASY TENSION CLEAT - Looking for even easier unclipping? POWRLINK ZERO is compatible with our Easy Tension Cleat, which can be purchased separately.SPECS:Physical Dimensions: 9 x 4cmCountry of Origin: VietnamWeight: 250g | 0.55lbs total (Left: 138g, Right: 112g)Stack Height: 13mm (3 hole)Q Factor: 55mmBody Material: GrivorySpindle Material: Stainless SteelBearing Type: Triple Sealed Cartridge & Needle BearingsCornering Clearance: 39°Cleats: Standard Tension Included (Easy Tension Compatible)Release Angle: Micro Adjustable from 0° to 7.5°Pedal Float: Adjustable from 0° to 15°Cleat Fore-Aft Adjustability: Up to 13mmCleat Left-Right Adjustability: Up to 6mmWalkable Cleat: Yes (adaptor included)Battery Life: Up to 75 hoursConnectivity: ANT+, BluetoothMax Rider Weight: 250lbs / 113 kg

PS8 Red, -4°C/+4°C, 60g - PS8 - Performance Speed 8 Red. A great base prep wax! - The PS series are great gliders for training and competition with good glide properties.PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X.

Rear hose for Hayes Dominion brakes Use: Hayes Dominion A4/A2 Length: 2000 mm Color: black The hose is reinforced with Kevlar for longer life Manufacturer's Mark: 98-36138-K001

The DT Swiss XM 551 rim, made from DT Swiss specified extra strong alloy, the patented PHR nipple system and excellent tubeless compatibility allow the full potential of these rims to be used. Technical features: Use: MTB / All Mountain Size: 27.5" Reference diameter ERD: 564mm Rim diameter: 584mm Inner width: 40mm Outer width: 44mm Height: 21mm Brake type: Disc brake Bore Type: Non-Eyelet (PHR washer) Valve hole: Presta / SV Ø 6.5 mm Max recommended system weight: 120kg (body weight + bike + equipment) ASTM Classification: 4 Weight: 595g (manufacturer information)

UNIOR key for SHIMANO bottom brackets For all types of integrated axis SHIMANO XTR FC-M960, XT FC-M760, SAINT FC-M800, RACE FACE X-TYPE, FSA MEGAE X, Truatív Giga X- Pipe With a puller for crank lock nuts attached to a magnet Ergo. handle covered with high-quality rubber with a hole for hanging Material: quality tool steel, hardened, chrome-plated Length: 350 mm Weight: 296 g Designed for PROFI use

The proven technology of bearings and seals from ACROS ensures a long service life of the center assembly on your bike. The used angular contact ball bearings absorb the combined axial and radial forces that arise, for example, when stepping out of the saddle, better than conventional ball bearings from other manufacturers. The special bearing grease ensures a stable lubricating film at high loads and "low" speeds, is also highly water-repellent and offers high washout resistance. Characteristics: Stainless steel - Industry - Angular ball bearings, double seal CNC - made in Germany / Al7000 series Rubber seal + dust cover Technical features: Compatibility: Shimano/Hollowtech II, Road and MTB cranks Bearing cup diameter: 42 mm Width: 68/73 mm Weight: 99 g Color: Black Installation standard: BB30

The DURA-ACE Di2 front derailleur has an improved ergonomic design for better aerodynamics and compactness. SHIMANO Synchonized Shifting, resistance in any weather conditions and fast and smooth shifting even at high torque. Technologies used: Synchronized Shifting, Di2 Type: ROAD Total package weight: 261 g 2x11 speed Type of assembly: Brazed-on mount Material: Aluminum / Steel The performance and accuracy of the Di2 is unmatched. Enables beautifully smooth shifting. Virtually maintenance-free: once you've customized a Di2 kit to your liking, you'll never want anything else. The DURA-ACE Di2 kit is thoroughly tested by professional riders in the peloton. Trouble-free use in everyday weather conditions is a key element that contributes to flawless comfort when braking and shifting during training, races or weekend rides.

Handy Vision spacer to boost the arm rests for a higher arm position - compatible with Metron TFA aero bars!

Material: EVA + LYCRA Weight of pair: 12.5 g Suitable for: Falcon TT (J bend, S bend), TIME ZONE AEROBAR

Brake pads metal sintered/steel Suitable for the following SRAM disc brakes: LEVEL STEALTH 4-PISTON G2 GUIDE TRAIL Key Features: Noisier than organic brake pads Suitable for downhill, In need of heavy duty braking Friction fade at higher temperature than organic brake pads Better performance in wet conditions compared to organic plates Longer bed in time With aluminum carriers

Gravel shift/brake lever left Dual Control, 2-speed Mechanical shift For hydraulic brakes Shift cable included Specification: Application: Gravel Group: GRX Type: Dual-Control (STI) Left 2-speed Handlebar diameter: 23.8mm/24.2mm Brake type: Hydraulic disc brake Recommended brake hose: SM-BH90-JK-SSR Recommended brake caliper: BR-RX810 / BR-RX400 Recommended brake disc: SM-RT800 / SM-RT70 / SM-RT64

This is a direct replacement for any VTT or VTT Pro compression damper for Manitou Mezzer Expert.Please make sure you select the right damper for your fork. Refer to your forks service manual for proper installation instructions.

Decal Kit for Manitou Mezzer Pro fork.

Rebound damper for Mezzer Expert fork.

Cartridge damper asssembly MC2 for Manitou Mattoc Pro, MY22+ (model year). Also supplied with knobs. Thread: M31X0.8 MY22+ (model year).

Rebound damper assembly 32 mm for Manitou R7 Pro. Knobs included.

SUNringle SRX CL Rear Bearing 6903/63803 rear hub bearings. In the picture, the bearings are shown under the number 6. Compatible hubs: Reynolds/Ringle SRX-CL 24H-28H REAR HUBS Reynolds/Ringle SRX-CL REAR Compatible wheels: Reynolds AR 46 Reynolds G700/G650 Reynolds AR 60 To verify the compatibility of the bearing with the hub, we recommend contacting us at obchod@procycling.sk

Air Compression rod for Manitou Markhor, M30.

Compression damper compatible with all Manitou forks with 32mm leg diameter (model years 2021+), which contain Kwik Toggle technology. Thread: M29.6x.75

Spacer Reynolds. In the picture, the spacer is shown under the number 7. Dimensions: 17.5 x 15 x 2.1 mm Compatible cartridge: Reynolds GW TR3 DB 12142 24H Reynolds GW RB SHIM/XDR/Campy 9130 SP 24H Reynolds GW MTN CL SHIM 14212 28H Reynolds GW TR6 SHIM 12X157 28H Compatible with wheels: Reynolds ATR X 650B/700C Reynolds ATR 650B/700C Reynolds AR 29/AR 29 X Reynolds AR 29/AR 29 X TUBELESS CLINCHER DB Reynolds AR 41/AR 41 X TUBELESS CLINCHER Reynolds AR 58/AR 58 X TUBELESS CLINCHER Reynolds AR58/62 / AR58/62 X TUBELESS CLINCHER DB Reynolds AR58 650B/AR58 X 650B TUBELESS CLINCHER DB Reynolds AR80/AR80 X TUBELESS CLINCHER DB Reynolds TR 249 MOUNTAIN Reynolds TR 249 S MOUNTAIN Reynolds TR 309/289 XC Reynolds TR 309/289 S XC Reynolds TR 307/309 MOUNTAIN Reynolds TR 307/309 S MOUNTAIN Reynolds TR 367 MOUNTAIN Reynolds TR 367 S MOUNTAIN Reynolds TR 307/309 E MOUNTAIN Reynolds TR 307/309 E MOUNTAIN BOOST + 157 Reynolds TR 367 E MOUNTAIN Reynolds TR 367 E MOUNTAIN BOOST + 157

Front adapter for a disc with a diameter of 203 mm. Compatible with a direct mount fork or frame with a Post Mount caliper. Adapter from 160mm to 203mm. Pay attention to the max. permitted disc diameter depending on frame or fork!

Gossamer and SL-K road and gravel chainring BCD: 120/90 mm Number of teeth: 50 For the 2x11 and 2x10 speed system Drive compatibility: Shimano 10/11S, Sram10/11S, Shimano 10/11S, Sram 10/11S, FSA 11S Number of holes: 4

Basic Shimano TX30 shifter with easy assembly, ergonomic shift lever and speed indicator, thanks to which you have 100% control over your ride. Shifting is primarily designed for riders with less grip and women. Typ: MTB Total package weight: 110 g 3 speed Left with pointer Material: Aluminum / Steel / Plastic

A set of original Vision replacement pads/spacers for use with the ACR stem for internal cable routing. The set contains 1 x 5 mm and 2 x 10 mm.

Centerline 2 Piece CenterLock 180mm Black Rounded

Looking for extra storage without filling your jersey pockets full. "Pick up the Lezyne Flow Caddy for lightweight and easy carrying inside a standard bottle cage. This sturdy container carries essential tools and driving accessories on long trips where help is far away. The watertight threaded cap protects showers and sprays from ruining tools and equipment.

Ceramic lubricant for wet and muddy conditionsMuc-Off C3 Wet Ceramic Lube - The secret to C3 Ceramic Wet Chain Lube is its unique ceramic coating that provides incredible durability and long distance performance on all bicycle chains. Our innovative chain oil formulation also uses boron nitride, which provides extremely low friction for maximum drive chain efficiency, high performance and durability. The water resistant properties of Muc-Off C3 Ceramic Wet Chain Lube also mean that your drive chain will excel in even the toughest riding conditions.Looking for long chain oil service intervals and precise gear changes with extremely low friction? Look no further. C3 Ceramic Wet Lube is packaged in an ergonomic bottle complete with a pipetting system for easy use and application. It's also 95% biodegradable and ideal for road, cyclocross and MTB bikes.Ideal chain lubricant for road cycling, cyclocross and MTBExcellent in wet and muddy conditionsContains boron nitrides to increase efficiencyForms a ceramic coating to protect the chainExceptionally high performance over long distancesIncredible durabilityPipette system for precise and easy applicationContains UV dye to control 100% coverageApplication:1. Thoroughly clean the chain2. Make sure the chain surface is dry3. Apply a moderate amount of C3 Wet Ceramic Chain Lube to the inside (not the side) of the chain while moving the pedals towards the rear4. Wipe off excess lubricantQ&A: 1. DO I NEED TO WIPE THE EXCESS OFF THE CHAIN RIGHT AWAY OR LEAVE IT ON?For best results, we always recommend wiping off the excess after application and, if possible, allowing it to dry for 3 to 4 hours before use.2. WHAT IS THE DIFFERENCE BETWEEN STANDARD BIO LUBRICANTS AND C3 CERAMIC LUBRICANTS?C3 lubricants contain added nanoceramic particles and synthetic polymers to help reduce friction (metal to metal contact on the chain) and offer performance and durability for the long haul. C3 raises the bar when it comes to providing the ultimate lubrication.

Velomann stem for Specialissima Comp/Impulso Comp/Impulso PRO - 120 mm diameter: ∅31.8mm lenght: 120mm

Brake adapter - 40 P (front 200/rear 180, adapter and stainless steel rainbow screws included) - Standard Mount

Rottefella NIS XCELERATOR mounting plate for NIS binding

Aluminum quick release for front hubs Material: Aluminum / Steel Length: 130 mm (total), 120 mm (usable) Weight: 70g

The new Dry Lube is a universal lubricant for both off-road and on-road use, now enhanced with ceramic boron nitride nanoparticles. This technology creates a waxy film on the chain that does not attract dirt, has low friction resistance, and extends lubrication intervals. As a result, the chain stays clean for a long time. This lubricant is best suited for dry, dusty conditions but can also handle moderately wet conditions. It is also suitable for derailleur pivots and cable housings. Dry Lube provides optimal drivetrain efficiency without attracting excessive amounts of dirt. Packaging: Dropper bottle Volume: 240 ml

	YATE Koncovky na trekové paličky Spare rubber tips for trekking poles Price for a pair SaleExternal supplier	4,99 € 2,50 €
	Topeak NANOMASTER DF CO2 inflator The Nanomaster DF is an small, lightweight and easy to use CO2 inflator featuring two 16 g CO2 cartridges.Weight: 149 gSize:11 x 4,7 x 3,6 cm Out of stock	29,95 €
	Wahoo POWRLINK Zero Single-sided Left Wattmeter pedals Single-sided power and cadence data, built on the race-proven SPEEDPLAY Advanced Pedal System.Built on the cutting-edge SPEEDPLAY Pedal System, POWRLINK ZERO single-sided power pedal delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance by providing the visibility, adjustability and efficiencies needed to break through to the next level. Pair with the Wahoo ecosystem of smart devices for a more full picture of your data and performance, and to track, analyze, share and improve.FEATURES:+/- 1% POWER ACCURACY - Lab tested accuracy that provides a precise power measurement for all training efforts.LEFT POWER - With a single-sided power sensor, your left side power is tracked and doubled to estimate total power output no matter where you are crushing watts.CADENCE - With its internal gyroscope, POWRLINK ZERO reports out cadence data to help you identify your sweet spot effort and power output.EASY APP SET-UP - Our simple and intuitive Wahoo Fitness app offers guided instructions on how to install POWRLINK ZEROs on any bike, calibrate the pedals for accuracy, and perform firmware updates.WAHOO ECOSYSTEM COMPATIBLE - Pair POWRLINK ZEROs power meter pedals with the rest of the Wahoo Ecosystem for the most connected training experience. Track your metrics outdoors on an ELEMNT GPS Device or control indoors on a KICKR Smart Trainer for consistent data anywhere, anytime.DUAL-BAND ANT+ AND BLUETOOTH TECHNOLOGY - POWRLINK ZERO can simultaneously connect to three Bluetooth devices while broadcasting to an unlimited number of ANT+ devices.ENHANCED WALKABILITY - The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike.INTEGRATED PROFILE - POWRLINK ZERO and the SPEEDPLAY Standard Tension Cleat create a secure connection and a streamlined profile. The two form a seamless integration that aids power transfer and increases aerodynamics.3-AXIS ADJUSTABILITY - The cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float.ROTATIONAL FREE FLOAT - POWRLINK ZERO provides up to 15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency.SUPERIOR CORNERING CLEARANCE - We've adapted the best-in-class corner clearance of SPEEDPLAY Advanced Pedal System into POWRLINK ZERO. This pedal and cleat integration allows for a large degree of lean on the bike when riding tight corners. Pedal with confidence knowing your pedal won't strike the ground and leave the competition in the dust.EXCEPTIONAL DURABILITY - POWRLINK ZERO pedals offer uncompromised durability and minimal maintenance thanks to their stainless steel construction and triple-sealed bearing system.TEMPERATURE COMPENSATION - POWRLINK ZERO is tested and proven to provide accurate power data across changing temperatures that you are sure to encounter while riding.RECHARGEABLE BATTERY - Powered by a rechargeable lithium battery, POWRLINK ZERO power pedals have a battery life with up to 75 hours.STANDARD TENSION CLEAT - OWRLINK ZERO pedals include a set of Standard Tension Cleats and cleat surrounds for an aerodynamic profile and walkable system.EASY TENSION CLEAT - Looking for even easier unclipping? POWRLINK ZERO is compatible with our Easy Tension Cleat, which can be purchased separately.SPECS:Physical Dimensions: 9 x 4cmCountry of Origin: VietnamWeight: 250g \| 0.55lbs total (Left: 138g, Right: 112g)Stack Height: 13mm (3 hole)Q Factor: 55mmBody Material: GrivorySpindle Material: Stainless SteelBearing Type: Triple Sealed Cartridge & Needle BearingsCornering Clearance: 39°Cleats: Standard Tension Included (Easy Tension Compatible)Release Angle: Micro Adjustable from 0° to 7.5°Pedal Float: Adjustable from 0° to 15°Cleat Fore-Aft Adjustability: Up to 13mmCleat Left-Right Adjustability: Up to 6mmWalkable Cleat: Yes (adaptor included)Battery Life: Up to 75 hoursConnectivity: ANT+, BluetoothMax Rider Weight: 250lbs / 113 kg In stock	649,99 €
	Swix PS08 red 60 g (-4°C / 4°C) Glide Wax PS8 Red, -4°C/+4°C, 60g - PS8 - Performance Speed 8 Red. A great base prep wax! - The PS series are great gliders for training and competition with good glide properties.PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PromotionExternal supplier	10,00 € 9,00 €
	Hayes K2 Hydraulic Hose Kit Brake Banjo Rear hose kit Rear hose for Hayes Dominion brakes Use: Hayes Dominion A4/A2 Length: 2000 mm Color: black The hose is reinforced with Kevlar for longer life Manufacturer's Mark: 98-36138-K001 In stock	53,00 €
	DT Swiss XM 551 27,5" 40mm 28dier Rim for mountain wheels The DT Swiss XM 551 rim, made from DT Swiss specified extra strong alloy, the patented PHR nipple system and excellent tubeless compatibility allow the full potential of these rims to be used. Technical features: Use: MTB / All Mountain Size: 27.5" Reference diameter ERD: 564mm Rim diameter: 584mm Inner width: 40mm Outer width: 44mm Height: 21mm Brake type: Disc brake Bore Type: Non-Eyelet (PHR washer) Valve hole: Presta / SV Ø 6.5 mm Max recommended system weight: 120kg (body weight + bike + equipment) ASTM Classification: 4 Weight: 595g (manufacturer information) In stock	145,00 €
	Unior Bottom Bracket Tool GXP Shimano Bottom bracket remover UNIOR key for SHIMANO bottom brackets For all types of integrated axis SHIMANO XTR FC-M960, XT FC-M760, SAINT FC-M800, RACE FACE X-TYPE, FSA MEGAE X, Truatív Giga X- Pipe With a puller for crank lock nuts attached to a magnet Ergo. handle covered with high-quality rubber with a hole for hanging Material: quality tool steel, hardened, chrome-plated Length: 350 mm Weight: 296 g Designed for PROFI use In stock	41,50 €
	Acros BB30 68/73 mm Bottom bracket The proven technology of bearings and seals from ACROS ensures a long service life of the center assembly on your bike. The used angular contact ball bearings absorb the combined axial and radial forces that arise, for example, when stepping out of the saddle, better than conventional ball bearings from other manufacturers. The special bearing grease ensures a stable lubricating film at high loads and "low" speeds, is also highly water-repellent and offers high washout resistance. Characteristics: Stainless steel - Industry - Angular ball bearings, double seal CNC - made in Germany / Al7000 series Rubber seal + dust cover Technical features: Compatibility: Shimano/Hollowtech II, Road and MTB cranks Bearing cup diameter: 42 mm Width: 68/73 mm Weight: 99 g Color: Black Installation standard: BB30 In stock	51,00 €
	Shimano DURA-ACE R9150 2X11 brazed-on mount Road front derailleur The DURA-ACE Di2 front derailleur has an improved ergonomic design for better aerodynamics and compactness. SHIMANO Synchonized Shifting, resistance in any weather conditions and fast and smooth shifting even at high torque. Technologies used: Synchronized Shifting, Di2 Type: ROAD Total package weight: 261 g 2x11 speed Type of assembly: Brazed-on mount Material: Aluminum / Steel The performance and accuracy of the Di2 is unmatched. Enables beautifully smooth shifting. Virtually maintenance-free: once you've customized a Di2 kit to your liking, you'll never want anything else. The DURA-ACE Di2 kit is thoroughly tested by professional riders in the peloton. Trouble-free use in everyday weather conditions is a key element that contributes to flawless comfort when braking and shifting during training, races or weekend rides. In stock	444,95 €
	VISION Metron TFA Arm Rest Spacer Set Stack spacer kit for handlebars Handy Vision spacer to boost the arm rests for a higher arm position - compatible with Metron TFA aero bars! Out of stock	52,00 €
	Controltech spare armrests for controltech extensions Armrests Material: EVA + LYCRA Weight of pair: 12.5 g Suitable for: Falcon TT (J bend, S bend), TIME ZONE AEROBAR In stock	14,90 €
	SRAM TRAIL/GUIDE/G2 Sintered brake pads Brake pads metal sintered/steel Suitable for the following SRAM disc brakes: LEVEL STEALTH 4-PISTON G2 GUIDE TRAIL Key Features: Noisier than organic brake pads Suitable for downhill, In need of heavy duty braking Friction fade at higher temperature than organic brake pads Better performance in wet conditions compared to organic plates Longer bed in time With aluminum carriers In stock	29,00 €
	Shimano GRX STRX810 left 2-s mech., hydraulic Road shifter Gravel shift/brake lever left Dual Control, 2-speed Mechanical shift For hydraulic brakes Shift cable included Specification: Application: Gravel Group: GRX Type: Dual-Control (STI) Left 2-speed Handlebar diameter: 23.8mm/24.2mm Brake type: Hydraulic disc brake Recommended brake hose: SM-BH90-JK-SSR Recommended brake caliper: BR-RX810 / BR-RX400 Recommended brake disc: SM-RT800 / SM-RT70 / SM-RT64 In stock	221,95 €
	Manitou VTT Compression Damper - Mezzer Expert VTT Compression Damper This is a direct replacement for any VTT or VTT Pro compression damper for Manitou Mezzer Expert.Please make sure you select the right damper for your fork. Refer to your forks service manual for proper installation instructions. Preorder	142,00 €
	Manitou Mezzer Pro Decal Kit Decal Kit Decal Kit for Manitou Mezzer Pro fork. In stock	36,00 €
	Manitou Rebound Damper - Mezzer Expert Rebound Damper Rebound damper for Mezzer Expert fork. Preorder	117,00 €
	Manitou Mattoc Pro MY22+ Damper Assy MC2 Sealed Damper Cartridge damper asssembly MC2 for Manitou Mattoc Pro, MY22+ (model year). Also supplied with knobs. Thread: M31X0.8 MY22+ (model year). Preorder	305,00 €
	Manitou R7 Pro Rebound Damper Assy 32 mm Rebound damper assembly Rebound damper assembly 32 mm for Manitou R7 Pro. Knobs included. Preorder	137,00 €
	SUNringle SRX CL Rear Bearing 6903/63803-D2 Kit Rear hub bearings SUNringle SRX CL Rear Bearing 6903/63803 rear hub bearings. In the picture, the bearings are shown under the number 6. Compatible hubs: Reynolds/Ringle SRX-CL 24H-28H REAR HUBS Reynolds/Ringle SRX-CL REAR Compatible wheels: Reynolds AR 46 Reynolds G700/G650 Reynolds AR 60 To verify the compatibility of the bearing with the hub, we recommend contacting us at obchod@procycling.sk In stock	39,00 €
	Manitou Markhor AIR COMPRESSION ROD 80/100/120, M26.5X1 Air Compression rod Air Compression rod for Manitou Markhor, M30. In stock	43,00 €
	Manitou 32 mm KIT, COMPRESSION DAMPER, KWIK TOGGLE Compression damper Compression damper compatible with all Manitou forks with 32mm leg diameter (model years 2021+), which contain Kwik Toggle technology. Thread: M29.6x.75 In stock	28,00 €
	Reynolds Spacer GW RED 17.5152.1 mm Spacer for hubs Spacer Reynolds. In the picture, the spacer is shown under the number 7. Dimensions: 17.5 x 15 x 2.1 mm Compatible cartridge: Reynolds GW TR3 DB 12142 24H Reynolds GW RB SHIM/XDR/Campy 9130 SP 24H Reynolds GW MTN CL SHIM 14212 28H Reynolds GW TR6 SHIM 12X157 28H Compatible with wheels: Reynolds ATR X 650B/700C Reynolds ATR 650B/700C Reynolds AR 29/AR 29 X Reynolds AR 29/AR 29 X TUBELESS CLINCHER DB Reynolds AR 41/AR 41 X TUBELESS CLINCHER Reynolds AR 58/AR 58 X TUBELESS CLINCHER Reynolds AR58/62 / AR58/62 X TUBELESS CLINCHER DB Reynolds AR58 650B/AR58 X 650B TUBELESS CLINCHER DB Reynolds AR80/AR80 X TUBELESS CLINCHER DB Reynolds TR 249 MOUNTAIN Reynolds TR 249 S MOUNTAIN Reynolds TR 309/289 XC Reynolds TR 309/289 S XC Reynolds TR 307/309 MOUNTAIN Reynolds TR 307/309 S MOUNTAIN Reynolds TR 367 MOUNTAIN Reynolds TR 367 S MOUNTAIN Reynolds TR 307/309 E MOUNTAIN Reynolds TR 307/309 E MOUNTAIN BOOST + 157 Reynolds TR 367 E MOUNTAIN Reynolds TR 367 E MOUNTAIN BOOST + 157 In stock	6,00 €
	Shimano SM-MAF203 front disc adapter 160/203 PM/PM Front disc adapter Front adapter for a disc with a diameter of 203 mm. Compatible with a direct mount fork or frame with a Post Mount caliper. Adapter from 160mm to 203mm. Pay attention to the max. permitted disc diameter depending on frame or fork! In stock	11,95 €
	FSA Road GOSSAMER 120x50 Chainring Gossamer and SL-K road and gravel chainring BCD: 120/90 mm Number of teeth: 50 For the 2x11 and 2x10 speed system Drive compatibility: Shimano 10/11S, Sram10/11S, Shimano 10/11S, Sram 10/11S, FSA 11S Number of holes: 4 In stock	56,90 €
	Shimano SL-TX30 3-S. Left MTB shifting Basic Shimano TX30 shifter with easy assembly, ergonomic shift lever and speed indicator, thanks to which you have 100% control over your ride. Shifting is primarily designed for riders with less grip and women. Typ: MTB Total package weight: 110 g 3 speed Left with pointer Material: Aluminum / Steel / Plastic In stock	6,95 €
	VISION spacer kit ACR 1x5mm+2x10mm MW010 / 011 Spacers under the stem A set of original Vision replacement pads/spacers for use with the ACR stem for internal cable routing. The set contains 1 x 5 mm and 2 x 10 mm. In stock	29,50 €
	SRAM ROTOR CNTRLN 2P CL 180MM BLACK ROUNDED Brake disc Centerline 2 Piece CenterLock 180mm Black Rounded In stock	88,95 €
	FABRIC 2017 LÁHEV 600ml CLEAR/YELLOW CAP (FP4016U0622) Qty. Uni Bike bottle In stock	12,95 €
	FABRIC 2019 LÁHEV 600ml CLEAR/GREEN CAP (FP4016U0322) Qty. Uni Bike bottle In stock	12,95 €
	LEZYNE Tool container LEZYNE FLOW CADDY Storage box Looking for extra storage without filling your jersey pockets full. "Pick up the Lezyne Flow Caddy for lightweight and easy carrying inside a standard bottle cage. This sturdy container carries essential tools and driving accessories on long trips where help is far away. The watertight threaded cap protects showers and sprays from ruining tools and equipment. In stock	9,95 €
	MUC-OFF C3 Wet Ceramic Lube 50ml Lubricant Ceramic lubricant for wet and muddy conditionsMuc-Off C3 Wet Ceramic Lube - The secret to C3 Ceramic Wet Chain Lube is its unique ceramic coating that provides incredible durability and long distance performance on all bicycle chains. Our innovative chain oil formulation also uses boron nitride, which provides extremely low friction for maximum drive chain efficiency, high performance and durability. The water resistant properties of Muc-Off C3 Ceramic Wet Chain Lube also mean that your drive chain will excel in even the toughest riding conditions.Looking for long chain oil service intervals and precise gear changes with extremely low friction? Look no further. C3 Ceramic Wet Lube is packaged in an ergonomic bottle complete with a pipetting system for easy use and application. It's also 95% biodegradable and ideal for road, cyclocross and MTB bikes.Ideal chain lubricant for road cycling, cyclocross and MTBExcellent in wet and muddy conditionsContains boron nitrides to increase efficiencyForms a ceramic coating to protect the chainExceptionally high performance over long distancesIncredible durabilityPipette system for precise and easy applicationContains UV dye to control 100% coverageApplication:1. Thoroughly clean the chain2. Make sure the chain surface is dry3. Apply a moderate amount of C3 Wet Ceramic Chain Lube to the inside (not the side) of the chain while moving the pedals towards the rear4. Wipe off excess lubricantQ&A: 1. DO I NEED TO WIPE THE EXCESS OFF THE CHAIN RIGHT AWAY OR LEAVE IT ON?For best results, we always recommend wiping off the excess after application and, if possible, allowing it to dry for 3 to 4 hours before use.2. WHAT IS THE DIFFERENCE BETWEEN STANDARD BIO LUBRICANTS AND C3 CERAMIC LUBRICANTS?C3 lubricants contain added nanoceramic particles and synthetic polymers to help reduce friction (metal to metal contact on the chain) and offer performance and durability for the long haul. C3 raises the bar when it comes to providing the ultimate lubrication. In stock	17,99 €
	Velomann handlebar stem Specialissima Comp/ Impulso Comp/PRO Stem Velomann stem for Specialissima Comp/Impulso Comp/Impulso PRO - 120 mm diameter: ∅31.8mm lenght: 120mm In stock	89,90 €
	SRAM Brake adapter AM POST BRACKET 40P SS RBO STD BOLTS Brake adapter Brake adapter - 40 P (front 200/rear 180, adapter and stainless steel rainbow screws included) - Standard Mount In stock	26,95 €
	Rottefella NIS XCELERATOR mounting plate for NIS binding Mounting plate Rottefella NIS XCELERATOR mounting plate for NIS binding PromotionExternal supplier	12,25 € 8,57 €
	LONGUS Front Quick Release 130mm Quick Release Aluminum quick release for front hubs Material: Aluminum / Steel Length: 130 mm (total), 120 mm (usable) Weight: 70g In stock	6,95 €
	FINISH LINE Dry Lube (BN) 240ml Chain oil The new Dry Lube is a universal lubricant for both off-road and on-road use, now enhanced with ceramic boron nitride nanoparticles. This technology creates a waxy film on the chain that does not attract dirt, has low friction resistance, and extends lubrication intervals. As a result, the chain stays clean for a long time. This lubricant is best suited for dry, dusty conditions but can also handle moderately wet conditions. It is also suitable for derailleur pivots and cable housings. Dry Lube provides optimal drivetrain efficiency without attracting excessive amounts of dirt. Packaging: Dropper bottle Volume: 240 ml In stock	16,95 €
Up 1 2

My wish list