Wishlist

The Nanomaster DF is an small, lightweight and easy to use CO2 inflator featuring two 16 g CO2 cartridges.Weight: 149 gSize:11 x 4,7 x 3,6 cm

PS8 Red, -4°C/+4°C, 60g - PS8 - Performance Speed 8 Red. A great base prep wax! - The PS series are great gliders for training and competition with good glide properties.PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X.

Rear hose for Hayes Dominion brakes Use: Hayes Dominion A4/A2 Length: 2000 mm Color: black The hose is reinforced with Kevlar for longer life Manufacturer's Mark: 98-36138-K001

UNIOR key for SHIMANO bottom brackets For all types of integrated axis SHIMANO XTR FC-M960, XT FC-M760, SAINT FC-M800, RACE FACE X-TYPE, FSA MEGAE X, Truatív Giga X- Pipe With a puller for crank lock nuts attached to a magnet Ergo. handle covered with high-quality rubber with a hole for hanging Material: quality tool steel, hardened, chrome-plated Length: 350 mm Weight: 296 g Designed for PROFI use

The proven technology of bearings and seals from ACROS ensures a long service life of the center assembly on your bike. The used angular contact ball bearings absorb the combined axial and radial forces that arise, for example, when stepping out of the saddle, better than conventional ball bearings from other manufacturers. The special bearing grease ensures a stable lubricating film at high loads and "low" speeds, is also highly water-repellent and offers high washout resistance. Characteristics: Stainless steel - Industry - Angular ball bearings, double seal CNC - made in Germany / Al7000 series Rubber seal + dust cover Technical features: Compatibility: Shimano/Hollowtech II, Road and MTB cranks Bearing cup diameter: 42 mm Width: 68/73 mm Weight: 99 g Color: Black Installation standard: BB30

The DURA-ACE Di2 front derailleur has an improved ergonomic design for better aerodynamics and compactness. SHIMANO Synchonized Shifting, resistance in any weather conditions and fast and smooth shifting even at high torque. Technologies used: Synchronized Shifting, Di2 Type: ROAD Total package weight: 261 g 2x11 speed Type of assembly: Brazed-on mount Material: Aluminum / Steel The performance and accuracy of the Di2 is unmatched. Enables beautifully smooth shifting. Virtually maintenance-free: once you've customized a Di2 kit to your liking, you'll never want anything else. The DURA-ACE Di2 kit is thoroughly tested by professional riders in the peloton. Trouble-free use in everyday weather conditions is a key element that contributes to flawless comfort when braking and shifting during training, races or weekend rides.

Handy Vision spacer to boost the arm rests for a higher arm position - compatible with Metron TFA aero bars!

Brake pads metal sintered/steel Suitable for the following SRAM disc brakes: LEVEL STEALTH 4-PISTON G2 GUIDE TRAIL Key Features: Noisier than organic brake pads Suitable for downhill, In need of heavy duty braking Friction fade at higher temperature than organic brake pads Better performance in wet conditions compared to organic plates Longer bed in time With aluminum carriers

Gravel shift/brake lever left Dual Control, 2-speed Mechanical shift For hydraulic brakes Shift cable included Specification: Application: Gravel Group: GRX Type: Dual-Control (STI) Left 2-speed Handlebar diameter: 23.8mm/24.2mm Brake type: Hydraulic disc brake Recommended brake hose: SM-BH90-JK-SSR Recommended brake caliper: BR-RX810 / BR-RX400 Recommended brake disc: SM-RT800 / SM-RT70 / SM-RT64

This is a direct replacement for any VTT or VTT Pro compression damper for Manitou Mezzer Expert.Please make sure you select the right damper for your fork. Refer to your forks service manual for proper installation instructions.

Decal Kit for Manitou Mezzer Pro fork.

Cartridge damper asssembly MC2 for Manitou Mattoc Pro, MY22+ (model year). Also supplied with knobs. Thread: M31X0.8 MY22+ (model year).

Rebound damper assembly 32 mm for Manitou R7 Pro. Knobs included.

SUNringle SRX CL Rear Bearing 6903/63803 rear hub bearings. In the picture, the bearings are shown under the number 6. Compatible hubs: Reynolds/Ringle SRX-CL 24H-28H REAR HUBS Reynolds/Ringle SRX-CL REAR Compatible wheels: Reynolds AR 46 Reynolds G700/G650 Reynolds AR 60 To verify the compatibility of the bearing with the hub, we recommend contacting us at obchod@procycling.sk

Compression damper compatible with all Manitou forks with 32mm leg diameter (model years 2021+), which contain Kwik Toggle technology. Thread: M29.6x.75

Spacer Reynolds. In the picture, the spacer is shown under the number 7. Dimensions: 17.5 x 15 x 2.1 mm Compatible cartridge: Reynolds GW TR3 DB 12142 24H Reynolds GW RB SHIM/XDR/Campy 9130 SP 24H Reynolds GW MTN CL SHIM 14212 28H Reynolds GW TR6 SHIM 12X157 28H Compatible with wheels: Reynolds ATR X 650B/700C Reynolds ATR 650B/700C Reynolds AR 29/AR 29 X Reynolds AR 29/AR 29 X TUBELESS CLINCHER DB Reynolds AR 41/AR 41 X TUBELESS CLINCHER Reynolds AR 58/AR 58 X TUBELESS CLINCHER Reynolds AR58/62 / AR58/62 X TUBELESS CLINCHER DB Reynolds AR58 650B/AR58 X 650B TUBELESS CLINCHER DB Reynolds AR80/AR80 X TUBELESS CLINCHER DB Reynolds TR 249 MOUNTAIN Reynolds TR 249 S MOUNTAIN Reynolds TR 309/289 XC Reynolds TR 309/289 S XC Reynolds TR 307/309 MOUNTAIN Reynolds TR 307/309 S MOUNTAIN Reynolds TR 367 MOUNTAIN Reynolds TR 367 S MOUNTAIN Reynolds TR 307/309 E MOUNTAIN Reynolds TR 307/309 E MOUNTAIN BOOST + 157 Reynolds TR 367 E MOUNTAIN Reynolds TR 367 E MOUNTAIN BOOST + 157

Front adapter for a disc with a diameter of 203 mm. Compatible with a direct mount fork or frame with a Post Mount caliper. Adapter from 160mm to 203mm. Pay attention to the max. permitted disc diameter depending on frame or fork!

Gossamer and SL-K road and gravel chainring BCD: 120/90 mm Number of teeth: 50 For the 2x11 and 2x10 speed system Drive compatibility: Shimano 10/11S, Sram10/11S, Shimano 10/11S, Sram 10/11S, FSA 11S Number of holes: 4

Basic Shimano TX30 shifter with easy assembly, ergonomic shift lever and speed indicator, thanks to which you have 100% control over your ride. Shifting is primarily designed for riders with less grip and women. Typ: MTB Total package weight: 110 g 3 speed Left with pointer Material: Aluminum / Steel / Plastic

Centerline 2 Piece CenterLock 180mm Black Rounded

Looking for extra storage without filling your jersey pockets full. "Pick up the Lezyne Flow Caddy for lightweight and easy carrying inside a standard bottle cage. This sturdy container carries essential tools and driving accessories on long trips where help is far away. The watertight threaded cap protects showers and sprays from ruining tools and equipment.

Ceramic lubricant for wet and muddy conditionsMuc-Off C3 Wet Ceramic Lube - The secret to C3 Ceramic Wet Chain Lube is its unique ceramic coating that provides incredible durability and long distance performance on all bicycle chains. Our innovative chain oil formulation also uses boron nitride, which provides extremely low friction for maximum drive chain efficiency, high performance and durability. The water resistant properties of Muc-Off C3 Ceramic Wet Chain Lube also mean that your drive chain will excel in even the toughest riding conditions.Looking for long chain oil service intervals and precise gear changes with extremely low friction? Look no further. C3 Ceramic Wet Lube is packaged in an ergonomic bottle complete with a pipetting system for easy use and application. It's also 95% biodegradable and ideal for road, cyclocross and MTB bikes.Ideal chain lubricant for road cycling, cyclocross and MTBExcellent in wet and muddy conditionsContains boron nitrides to increase efficiencyForms a ceramic coating to protect the chainExceptionally high performance over long distancesIncredible durabilityPipette system for precise and easy applicationContains UV dye to control 100% coverageApplication:1. Thoroughly clean the chain2. Make sure the chain surface is dry3. Apply a moderate amount of C3 Wet Ceramic Chain Lube to the inside (not the side) of the chain while moving the pedals towards the rear4. Wipe off excess lubricantQ&A: 1. DO I NEED TO WIPE THE EXCESS OFF THE CHAIN RIGHT AWAY OR LEAVE IT ON?For best results, we always recommend wiping off the excess after application and, if possible, allowing it to dry for 3 to 4 hours before use.2. WHAT IS THE DIFFERENCE BETWEEN STANDARD BIO LUBRICANTS AND C3 CERAMIC LUBRICANTS?C3 lubricants contain added nanoceramic particles and synthetic polymers to help reduce friction (metal to metal contact on the chain) and offer performance and durability for the long haul. C3 raises the bar when it comes to providing the ultimate lubrication.

Velomann stem for Specialissima Comp/Impulso Comp/Impulso PRO - 120 mm diameter: ∅31.8mm lenght: 120mm

Brake adapter - 40 P (front 200/rear 180, adapter and stainless steel rainbow screws included) - Standard Mount

Rottefella NIS XCELERATOR mounting plate for NIS binding

Aluminum quick release for front hubs Material: Aluminum / Steel Length: 130 mm (total), 120 mm (usable) Weight: 70g

	YATE Koncovky na trekové paličky Spare rubber tips for trekking poles Price for a pair SaleExternal supplier	4,99 € 2,50 €
	Topeak NANOMASTER DF CO2 inflator The Nanomaster DF is an small, lightweight and easy to use CO2 inflator featuring two 16 g CO2 cartridges.Weight: 149 gSize:11 x 4,7 x 3,6 cm Out of stock	29,95 €
	Swix PS08 red 60 g (-4°C / 4°C) Glide Wax PS8 Red, -4°C/+4°C, 60g - PS8 - Performance Speed 8 Red. A great base prep wax! - The PS series are great gliders for training and competition with good glide properties.PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. PromotionExternal supplier	10,00 € 9,00 €
	Hayes K2 Hydraulic Hose Kit Brake Banjo Rear hose kit Rear hose for Hayes Dominion brakes Use: Hayes Dominion A4/A2 Length: 2000 mm Color: black The hose is reinforced with Kevlar for longer life Manufacturer's Mark: 98-36138-K001 In stock	53,00 €
	Unior Bottom Bracket Tool GXP Shimano Bottom bracket remover UNIOR key for SHIMANO bottom brackets For all types of integrated axis SHIMANO XTR FC-M960, XT FC-M760, SAINT FC-M800, RACE FACE X-TYPE, FSA MEGAE X, Truatív Giga X- Pipe With a puller for crank lock nuts attached to a magnet Ergo. handle covered with high-quality rubber with a hole for hanging Material: quality tool steel, hardened, chrome-plated Length: 350 mm Weight: 296 g Designed for PROFI use In stock	41,50 €
	Acros BB30 68/73 mm Bottom bracket The proven technology of bearings and seals from ACROS ensures a long service life of the center assembly on your bike. The used angular contact ball bearings absorb the combined axial and radial forces that arise, for example, when stepping out of the saddle, better than conventional ball bearings from other manufacturers. The special bearing grease ensures a stable lubricating film at high loads and "low" speeds, is also highly water-repellent and offers high washout resistance. Characteristics: Stainless steel - Industry - Angular ball bearings, double seal CNC - made in Germany / Al7000 series Rubber seal + dust cover Technical features: Compatibility: Shimano/Hollowtech II, Road and MTB cranks Bearing cup diameter: 42 mm Width: 68/73 mm Weight: 99 g Color: Black Installation standard: BB30 In stock	51,00 €
	Shimano DURA-ACE R9150 2X11 brazed-on mount Road front derailleur The DURA-ACE Di2 front derailleur has an improved ergonomic design for better aerodynamics and compactness. SHIMANO Synchonized Shifting, resistance in any weather conditions and fast and smooth shifting even at high torque. Technologies used: Synchronized Shifting, Di2 Type: ROAD Total package weight: 261 g 2x11 speed Type of assembly: Brazed-on mount Material: Aluminum / Steel The performance and accuracy of the Di2 is unmatched. Enables beautifully smooth shifting. Virtually maintenance-free: once you've customized a Di2 kit to your liking, you'll never want anything else. The DURA-ACE Di2 kit is thoroughly tested by professional riders in the peloton. Trouble-free use in everyday weather conditions is a key element that contributes to flawless comfort when braking and shifting during training, races or weekend rides. In stock	444,95 €
	VISION Metron TFA Arm Rest Spacer Set Stack spacer kit for handlebars Handy Vision spacer to boost the arm rests for a higher arm position - compatible with Metron TFA aero bars! Out of stock	52,00 €
	SRAM TRAIL/GUIDE/G2 Sintered brake pads Brake pads metal sintered/steel Suitable for the following SRAM disc brakes: LEVEL STEALTH 4-PISTON G2 GUIDE TRAIL Key Features: Noisier than organic brake pads Suitable for downhill, In need of heavy duty braking Friction fade at higher temperature than organic brake pads Better performance in wet conditions compared to organic plates Longer bed in time With aluminum carriers In stock	29,00 €
	Shimano GRX STRX810 left 2-s mech., hydraulic Road shifter Gravel shift/brake lever left Dual Control, 2-speed Mechanical shift For hydraulic brakes Shift cable included Specification: Application: Gravel Group: GRX Type: Dual-Control (STI) Left 2-speed Handlebar diameter: 23.8mm/24.2mm Brake type: Hydraulic disc brake Recommended brake hose: SM-BH90-JK-SSR Recommended brake caliper: BR-RX810 / BR-RX400 Recommended brake disc: SM-RT800 / SM-RT70 / SM-RT64 In stock	221,95 €
	Manitou VTT Compression Damper - Mezzer Expert VTT Compression Damper This is a direct replacement for any VTT or VTT Pro compression damper for Manitou Mezzer Expert.Please make sure you select the right damper for your fork. Refer to your forks service manual for proper installation instructions. Preorder	142,00 €
	Manitou Mezzer Pro Decal Kit Decal Kit Decal Kit for Manitou Mezzer Pro fork. In stock	36,00 €
	Manitou Mattoc Pro MY22+ Damper Assy MC2 Sealed Damper Cartridge damper asssembly MC2 for Manitou Mattoc Pro, MY22+ (model year). Also supplied with knobs. Thread: M31X0.8 MY22+ (model year). Preorder	305,00 €
	Manitou R7 Pro Rebound Damper Assy 32 mm Rebound damper assembly Rebound damper assembly 32 mm for Manitou R7 Pro. Knobs included. Preorder	137,00 €
	SUNringle SRX CL Rear Bearing 6903/63803-D2 Kit Rear hub bearings SUNringle SRX CL Rear Bearing 6903/63803 rear hub bearings. In the picture, the bearings are shown under the number 6. Compatible hubs: Reynolds/Ringle SRX-CL 24H-28H REAR HUBS Reynolds/Ringle SRX-CL REAR Compatible wheels: Reynolds AR 46 Reynolds G700/G650 Reynolds AR 60 To verify the compatibility of the bearing with the hub, we recommend contacting us at obchod@procycling.sk In stock	39,00 €
	Manitou 32 mm KIT, COMPRESSION DAMPER, KWIK TOGGLE Compression damper Compression damper compatible with all Manitou forks with 32mm leg diameter (model years 2021+), which contain Kwik Toggle technology. Thread: M29.6x.75 In stock	28,00 €
	Reynolds Spacer GW RED 17.5152.1 mm Spacer for hubs Spacer Reynolds. In the picture, the spacer is shown under the number 7. Dimensions: 17.5 x 15 x 2.1 mm Compatible cartridge: Reynolds GW TR3 DB 12142 24H Reynolds GW RB SHIM/XDR/Campy 9130 SP 24H Reynolds GW MTN CL SHIM 14212 28H Reynolds GW TR6 SHIM 12X157 28H Compatible with wheels: Reynolds ATR X 650B/700C Reynolds ATR 650B/700C Reynolds AR 29/AR 29 X Reynolds AR 29/AR 29 X TUBELESS CLINCHER DB Reynolds AR 41/AR 41 X TUBELESS CLINCHER Reynolds AR 58/AR 58 X TUBELESS CLINCHER Reynolds AR58/62 / AR58/62 X TUBELESS CLINCHER DB Reynolds AR58 650B/AR58 X 650B TUBELESS CLINCHER DB Reynolds AR80/AR80 X TUBELESS CLINCHER DB Reynolds TR 249 MOUNTAIN Reynolds TR 249 S MOUNTAIN Reynolds TR 309/289 XC Reynolds TR 309/289 S XC Reynolds TR 307/309 MOUNTAIN Reynolds TR 307/309 S MOUNTAIN Reynolds TR 367 MOUNTAIN Reynolds TR 367 S MOUNTAIN Reynolds TR 307/309 E MOUNTAIN Reynolds TR 307/309 E MOUNTAIN BOOST + 157 Reynolds TR 367 E MOUNTAIN Reynolds TR 367 E MOUNTAIN BOOST + 157 In stock	6,00 €
	Shimano SM-MAF203 front disc adapter 160/203 PM/PM Front disc adapter Front adapter for a disc with a diameter of 203 mm. Compatible with a direct mount fork or frame with a Post Mount caliper. Adapter from 160mm to 203mm. Pay attention to the max. permitted disc diameter depending on frame or fork! In stock	11,95 €
	FSA Road GOSSAMER 120x50 Chainring Gossamer and SL-K road and gravel chainring BCD: 120/90 mm Number of teeth: 50 For the 2x11 and 2x10 speed system Drive compatibility: Shimano 10/11S, Sram10/11S, Shimano 10/11S, Sram 10/11S, FSA 11S Number of holes: 4 In stock	56,90 €
	Shimano SL-TX30 3-S. Left MTB shifting Basic Shimano TX30 shifter with easy assembly, ergonomic shift lever and speed indicator, thanks to which you have 100% control over your ride. Shifting is primarily designed for riders with less grip and women. Typ: MTB Total package weight: 110 g 3 speed Left with pointer Material: Aluminum / Steel / Plastic In stock	6,95 €
	SRAM ROTOR CNTRLN 2P CL 180MM BLACK ROUNDED Brake disc Centerline 2 Piece CenterLock 180mm Black Rounded In stock	88,95 €
	FABRIC 2017 LÁHEV 600ml CLEAR/YELLOW CAP (FP4016U0622) Qty. Uni Bike bottle In stock	12,95 €
	FABRIC 2019 LÁHEV 600ml CLEAR/GREEN CAP (FP4016U0322) Qty. Uni Bike bottle In stock	12,95 €
	LEZYNE Tool container LEZYNE FLOW CADDY Storage box Looking for extra storage without filling your jersey pockets full. "Pick up the Lezyne Flow Caddy for lightweight and easy carrying inside a standard bottle cage. This sturdy container carries essential tools and driving accessories on long trips where help is far away. The watertight threaded cap protects showers and sprays from ruining tools and equipment. In stock	9,95 €
	MUC-OFF C3 Wet Ceramic Lube 50ml Lubricant Ceramic lubricant for wet and muddy conditionsMuc-Off C3 Wet Ceramic Lube - The secret to C3 Ceramic Wet Chain Lube is its unique ceramic coating that provides incredible durability and long distance performance on all bicycle chains. Our innovative chain oil formulation also uses boron nitride, which provides extremely low friction for maximum drive chain efficiency, high performance and durability. The water resistant properties of Muc-Off C3 Ceramic Wet Chain Lube also mean that your drive chain will excel in even the toughest riding conditions.Looking for long chain oil service intervals and precise gear changes with extremely low friction? Look no further. C3 Ceramic Wet Lube is packaged in an ergonomic bottle complete with a pipetting system for easy use and application. It's also 95% biodegradable and ideal for road, cyclocross and MTB bikes.Ideal chain lubricant for road cycling, cyclocross and MTBExcellent in wet and muddy conditionsContains boron nitrides to increase efficiencyForms a ceramic coating to protect the chainExceptionally high performance over long distancesIncredible durabilityPipette system for precise and easy applicationContains UV dye to control 100% coverageApplication:1. Thoroughly clean the chain2. Make sure the chain surface is dry3. Apply a moderate amount of C3 Wet Ceramic Chain Lube to the inside (not the side) of the chain while moving the pedals towards the rear4. Wipe off excess lubricantQ&A: 1. DO I NEED TO WIPE THE EXCESS OFF THE CHAIN RIGHT AWAY OR LEAVE IT ON?For best results, we always recommend wiping off the excess after application and, if possible, allowing it to dry for 3 to 4 hours before use.2. WHAT IS THE DIFFERENCE BETWEEN STANDARD BIO LUBRICANTS AND C3 CERAMIC LUBRICANTS?C3 lubricants contain added nanoceramic particles and synthetic polymers to help reduce friction (metal to metal contact on the chain) and offer performance and durability for the long haul. C3 raises the bar when it comes to providing the ultimate lubrication. In stock	17,99 €
	Velomann handlebar stem Specialissima Comp/ Impulso Comp/PRO Stem Velomann stem for Specialissima Comp/Impulso Comp/Impulso PRO - 120 mm diameter: ∅31.8mm lenght: 120mm In stock	89,90 €
	SRAM Brake adapter AM POST BRACKET 40P SS RBO STD BOLTS Brake adapter Brake adapter - 40 P (front 200/rear 180, adapter and stainless steel rainbow screws included) - Standard Mount In stock	26,95 €
	Rottefella NIS XCELERATOR mounting plate for NIS binding Mounting plate Rottefella NIS XCELERATOR mounting plate for NIS binding PromotionExternal supplier	12,25 € 8,57 €
	LONGUS Front Quick Release 130mm Quick Release Aluminum quick release for front hubs Material: Aluminum / Steel Length: 130 mm (total), 120 mm (usable) Weight: 70g In stock	6,95 €
Up 1

My wish list