|
| | SHIMANO DEORE XT - Rear Derailleur - SHIMANO SHADOW RD+ - 1x12-speedThe all-new SHIMANO DEORE XT M8100 series of derailleurs brings a new level of drivetrain silence thank to decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with SHIMANO's new 12-speed cassettes boosts range.Fast and precise shifting performance optimized to take on any trailFaster and shockless shiftingHYPERGLIDE+Wide range 12-speed drivetrain with low sprocket combination -10-51TSilent drivetrain in all gear positionsDecreased rear derailleur and chain tension in low gearNew bumper added to rear derailleur pulley cageBump StopperBigger 13T pulleyStable drivetrain on rough terrainLow-profile designSHIMANO SHADOW RD+ In stock | 134,95 €
|
|
| | Pulley set (RD-R9250) - WP-Y3GK98010 NEWCOMPATIBLE MODELRD-R9250COMPATIBLE SERIESDURA-ACE R9200 SeriesType: RoadWeight: 32 g12 speedColour: black Out of stock | 38,95 €
|
|
| | T0825D Plexi scraper 5 mm - Plexi scraper for scraping off glider, 5 mm.Sharp and effective plexi scraper for scraping off glider, 5 mm. External supplier | 7,90 €
|
|
| | T0080 Steel scraper - Steel scraper for experienced waxers.
Sharp steel scraper for peeling or straightening bases
External supplier | 10,00 €
|
|
| |
Wireless Bluetooth and ANT+ Cycling Speed Sensor
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
Features - Wahoo RPM Speed Sensor
Dual Band Technology: Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
Wireless Connection: No tangled wires on your bike to connect the sensor to your device.
Magnetless: The RPM speed installs easily with no magnets required
Sleek, Lightweight Design: It only weighs 16.5 grams with the mount included
Speed Measurement: Provides accurate speed data during your ride
Hub Mount: Mounts on most front wheel hub with a secure silicon casing
Visible Connection: Two LED lights show the sensor's device connection (blue) and speed detection (red)
Replaceable Battery: No charging required! Operates on a coin cell battery for up to 1 years.
Universal Fit: RPM Speed will fit with most bikes and frame sizes
Out of stock | 39,99 €
|
|
| | Derailleur hangers, for models:
Call FS
Mutt
In stock | 15,00 €
|
|
| | The Orbea 15430161 rear derailleur hanger will allow you to replace the one on your 2021 Occam aluminium. It is compatible with Direct Mount rear derailleurs.
Brand: Orbea
Material: Aluminium 7075
Compatible axle: 12 mm
Number of gears: 12
Compatible models: Occam Hydro 21
In stock | 20,00 €
|
|
| | Swix Skin Impregnation improves the sliding properties of integrated belts. You can apply anywhere thanks to quick drying. It protects the tracks integrated into the slide and prevents them from freezing and improves the slide.
The solution is an excellent choice for the maintenance of skis with integrated belts, it extends their life and brings a better skiing experience. We recommend applying a solution for skiing. PromotionExternal supplier | 20,00 € 18,00 €
|
|
| | Organic brake pads have a softer braking sensation, are silent under wet conditions, and put less thermal stress on the brake. They do have more wear and less braking power than sintered brake pads. With aluminium carriers.
Suitable for the following SRAM disc brakes:
Level TL/Level T/Level/Level ULT/TLM B1 (2020+)/DB/Elixir
In stock | 36,00 €
|
|
| |
Power and engagement to lead the pack.
Make every effort count with the SPEEDPLAY standard tension road cleat. This integrated system delivers the power and engagement required to take on everything from steep climbs to all out racing. The only system to feature continuous 3-axis adjustability for all out performance and comfort on the bike.
FEATURES
ENHANCED WALKABILITY
The dimpled, low profile design and rubberized texture allow for better traction and enhanced walkability.
3 AXIS ADJUSTABILITY
Independent 3 axis adjustability to optimize fit and enhance performance through better biomechanics on the bike.
IDEAL FORE & AFT PLACEMENT
Up to 14mm of fore/aft (forward & back movement) adjustability to lock the cleat base plate into place on the bottom side of the shoe.
PRECISE SIDE TO SIDE TUNING
With the left/right adjustment you can further dial in your cleat placement. The cleat spring housing plat allows for up to 8mm of side to side flexibility.
ROTATIONAL FREE FLOAT
1 - 15 degress of micro-adjustable free float to dial in the perfect amount of movement.
EASY ACTION SPRINGThe Easy Tension walkable bike cleat utilizes an easy action spring mechanism for a simpler pedal engagement experience for those smaller or more novice riders.
In stock | 54,99 €
|
|
| | The SLX is ready to go anytime, anywhere, whether it's a day trip, a local cross-country race, or a ride with friends after work. It will definitely not disappoint you.
Derailleur SLX M7100 Shadow RD+ construction
Improved radiation performance
Lower noise
Larger 13-tooth pulleys
Lower rear derailleur preload on lower cassette cogs to prevent excessive chain tension on those gears.
Designed for a combination of 1x12 gears with a 10-45 and 10-51 teeth cassette.
Specification:
Technologies used: Shadow RD+
Type: MTB
Total package weight: 448 g
12 speed
Strap type: SGS-Super long strap
Mounting type: Direct mount
Capacity: 41 teeth
Black
Material: Aluminum / Steel
In stock | 92,95 €
|
|
| | Cartridge damper bleed tool for Mezzer Pro, Mara fork. In stock | 70,00 €
|
|
| | BIKE SMART COMPUTER BSC300 is equipped with a vibrant color display, it offers comprehensive navigation capabilities, allowing cyclists to easily explore new routes with confidence. Additionally, the BSC300 offers a range of colorful themes to choose from, as well as support for five major satellite navigation systems, ensuring maximum accuracy and reliability.
Technical characteristics:
Screen Display: 2.4" 320X240 pixel
Dimensions: 82x53x14.5mm
Weight: 67g
Data Storage: 8GB
Wireless: BLE5.0/ANT+
Waterproof: IPX7
Button: 6 Buttons
Battery life : 20 Hours
Battery : 600mAh
Interface : Type-C USB
Compatibility with SRAM eTap, Campagnolo EPS, Shimano Di2
Cycling Features:
Temperature: √
Calories: √
Altitude: √
Gradient: √
Lap: √
Setting via App: √
Custom Data Field: √
Dynamic Data: √
Page: 8
Single Page Data: 8
In The Box:
BSC300
Standard Bike Mounts
User Manual
In stock | 157,90 €
|
|
| | The Fenix ALD-10 adapter is used to attach Fenix bicycle lights to the GoPro mount.
So if you already use a GoPro mount on your handlebars, helmet or elsewhere, thanks to the Fenix ALD-10 reduction, you can now use Fenix bicycle lights with these mounts.
The adapter is made of hardened and durable plastic
Compatible with: BC20, BC21R V2.0, BC25R, BC26R, BC30, BC30 V2.0, BC30R, BC35R
Dimensions: 67 mm (length) x 24 mm (width) x 20 mm (height)
Weight: 10 g
Warning: not compatible with the old BC21R!
In stock | 5,90 €
|
|
| | HR40 has comfortable fabric strap, and slim, light and ergonomical design. Meanwhile, The battery life is about 1200 hours.
HR40 supports the connection with iGPSPORT bike computers or smart phones to sync real time heart rate data with iGPSPORT cloud platform.
It provides the functions of analyzing training data, checking training effect, managing training plan and maintaining a good training state.
Battery life: 1200 hours
Battery: CR2032
Dimensions: 59.8 x 35.3 x 11.9 mm
Weight: 47g
Heart rate range: 40-240 BPM
Strap length: 65~95cm
Compatible devices
GPS Bike Computer: BLE/ANT+
Sports watch: BLE/ANT+
Smart phones: BLE
Software: Wahoo fitness, Zwift, Bkool
In the box:
HR40x1
Chest Strapx1
User Manual x1
CR2032 Battery x1
In stock | 42,90 €
|
|
| | SPD70 speed sensor, excellent and compact, accurately captures bicycle speed data, easy installation, no magnet, wireless data transmission via Bluetooth or ANT+ protocol, 300 hours battery life, passed IPX7 waterproof test.
Dimensions: 35.4x33x10.8 mm
Sensing device: High-sensitivity speed sensor
Transmission: ANT+
Package includes: SPD70 x1. silicone cover x1, user manual x1, CR2025 battery x1.
Waterproof: IPX7
Battery: CR2025
Weight: 7.8 g (including battery)
In stock | 27,90 €
|
|
| | Revolution TechnewA tire designed for lowest rolling resistance, decent comfort and durability. Ideal for the city, on cycle paths, or even on rougher dirt roads. Excellent properties and durability achieved thanks to the new G+ Isotech material - The tyre meets the ECE-R 75 standard and is therefore durable enough for use on electric bikes- Special puncture protection- maximum grip on dry surfaces thanks to the negative pattern- available in both trekking and MTB sizes- reflective sides
In stock | 29,95 €
|
|
| | The bike inner tube is made mainly of butyl rubber. Butyl is a very elastic and airtight type of synthetic rubber. As with tires, additional additives are needed to create the rubber compound. The quality of the inner tube can vary considerably depending on the composition of the rubber. For example, Schwalbe tubes have extremely high air stability and elasticity. This high elasticity makes it possible to cover a wide range of different tyre sizes.There is a difference between hot-produced inner tubes and autoclave inner tubes. In-mould curing improves the uniformity of wall thickness, thereby reducing weight and improving air stability. For this reason, autoclave inner tubes, which are easier to produce, have become less common in recent years. Schwalbe inner tubes have always been produced by a thermoforming process.Each inner tube also needs a valve that is connected to the tube during the vulcanization process.In addition to the quality of the additives, the purity of the rubber compound is crucial to the quality of the inner tube. Before moulding, the base material is forced through seven filters under high pressure. All inner tubes are inserted and inflated into the mould for vulcanisation. Only this guarantees uniform wall thickness and high air stability.All tubes are inflated and tested for air stability for 24 hours. Then each inner tube is carefully inspected visually. Schwalbe inner tubes have been appreciated by German bicycle dealers for their high reliability for many years.The inner tube fits a large number of tyres due to its high elasticity and quality. The inner tube #17 works with tyres from 28 to 47 mm wide - a great advantage for in-store storage. At the same time, it is a testament to the quality of the inner tube.All valves are nickel plated and threaded. The valve core is always replaceable. Schwalbe inner tubes with a classic cyclo valve can be pressure tested because they have a high-pressure valve core.Every Schwalbe inner tube is 100% recyclable. We can use recycled material in the production of new inner tubes without loss of quality. We have developed a special devulcanization process in our factory and it has been proving very successful for several years. Currently every standard inner tube from Schwalbe consists of 20% recycled old inner tubes.Taking all transport routes into account, the energy balance is positive. Only a fifth of the energy is used compared to the production of new butyl.WHAT ARE THE ADVANTAGES OF LATEX INNER TUBES?Souls made from latex are more flexible than conventional butyl souls. This makes them slightly lighter. Their biggest advantage is their high level of protection against puncture. The highly elastic latex material is very difficult to puncture.The disadvantage lies in the inferior stability of the air. A latex inner tube tire must be inflated to the correct pressure before each ride. This explains why latex inner tubes are not suitable for everyday use.In addition, latex inner tubes are very soft and sensitive to oil, daylight, heat and uneven expansion. The inner tube must be replaced every time the tire is changed. As these characteristics lead to many problems, latex inner tubes are not in our range.
Out of stock | 9,95 €
|
|
| | The bike inner tube is made mainly of butyl rubber. Butyl is a very elastic and airtight type of synthetic rubber. As with tires, additional additives are needed to create the rubber compound. The quality of the inner tube can vary considerably depending on the composition of the rubber. For example, Schwalbe tubes have extremely high air stability and elasticity. This high elasticity makes it possible to cover a wide range of different tyre sizes.There is a difference between hot-produced inner tubes and autoclave inner tubes. In-mould curing improves the uniformity of wall thickness, thereby reducing weight and improving air stability. For this reason, autoclave inner tubes, which are easier to produce, have become less common in recent years. Schwalbe inner tubes have always been produced by a thermoforming process.Each inner tube also needs a valve that is connected to the tube during the vulcanization process.In addition to the quality of the additives, the purity of the rubber compound is crucial to the quality of the inner tube. Before moulding, the base material is forced through seven filters under high pressure. All inner tubes are inserted and inflated into the mould for vulcanisation. Only this guarantees uniform wall thickness and high air stability.All tubes are inflated and tested for air stability for 24 hours. Then each inner tube is carefully inspected visually. Schwalbe inner tubes have been appreciated by German bicycle dealers for their high reliability for many years.The inner tube fits a large number of tyres due to its high elasticity and quality. The inner tube #17 works with tyres from 28 to 47 mm wide - a great advantage for in-store storage. At the same time, it is a testament to the quality of the inner tube.All valves are nickel plated and threaded. The valve core is always replaceable. Schwalbe inner tubes with a classic cyclo valve can be pressure tested because they have a high-pressure valve core.Every Schwalbe inner tube is 100% recyclable. We can use recycled material in the production of new inner tubes without loss of quality. We have developed a special devulcanization process in our factory and it has been proving very successful for several years. Currently every standard inner tube from Schwalbe consists of 20% recycled old inner tubes.Taking all transport routes into account, the energy balance is positive. Only a fifth of the energy is used compared to the production of new butyl.WHAT ARE THE ADVANTAGES OF LATEX INNER TUBES?Souls made from latex are more flexible than conventional butyl souls. This makes them slightly lighter. Their biggest advantage is their high level of protection against puncture. The highly elastic latex material is very difficult to puncture.The disadvantage lies in the inferior stability of the air. A latex inner tube tire must be inflated to the correct pressure before each ride. This explains why latex inner tubes are not suitable for everyday use.In addition, latex inner tubes are very soft and sensitive to oil, daylight, heat and uneven expansion. The inner tube must be replaced every time the tire is changed. As these characteristics lead to many problems, latex inner tubes are not in our range.EXTRALIGHTReduced weight. Same reliability as the standard version.
In stock | 10,95 €
|
|
| | Hydraulic disc brake M9120. Composed of brake lever BLM9120 and caliper BRM9120 without adapter, connected by hose BH90-SBM. Pads- resin N03A.One Way Bleeding, Servowave, I-Spec EVType: MTB, Total Package Weight: 692g, Front, Black, One Way Bleeding, Hose Length: 1000mm, Mounting: Sleeve Mount, Post Mount, Material: Aluminum/SteelAfter 27 years of development, we're right back where it all started: with components specifically developed for mountain bike racing. Designed to meet the most demanding requirements with unsurpassed riding characteristics. The new XTR M9100 delivers the most versatile kit designed for XC, Enduro and Marathons.
In stock | 304,95 €
|
|
| | In both dry and wet conditions, the tyre excels with excellent grip. The tyre has a strong puncture protection layer which gives it excellent puncture protection.
Specifications:
Size: 28 x 1.10
ETRTO size: 28-622
Type of bike: road bike
Tyre type: folding tyre
Reflection: no
Color: black
Material: rubber
Weight: 310 grams
Tyre pressure: 6.00 - 8.00 Bar
Maximum load: 65 kg
EPI: 50
In stock | 24,00 €
|
|
| | durable outer tyre with Kevlar Guard puncture protection.
In stock | 12,95 €
|
|
| | High-quality natural cork with felt on one side.
For polishing wax and liquid topping products.
Size 44 mm x 66 mm x 34 mm thick.
Natural cork with filt
For polishing glide wax
External supplier | 9,00 €
|
|
| | The SRAM replacement lever caps in convex and concave design for the AXS Pod Ultimate shift lever. In stock | 21,95 €
|
|
| | The new Pannier DryBag is constructed from a tough, sonically welded, and seamed sealed waterproof material.
A watertight roll-top closure provides maximum protection from trail dust, road spray, and nasty wet weather. Our new Handle Loc system quickly and securely attaches the pannier to the rack and is easily removed with a simple upward press and pull of the top-mounted carry handle.
Specifications:
Capacity: 24 L
Material: Waterproof fabric sonically welded seams
Bag Attachment: Handle Loc system, Fits racks ø8 / 10 / 12 / 16 mm
Size: 47 x 31.3 x 15 / 18.5” x 12.3” x 5.9” (24 L / Closure)
Weight: 784 g
Features:
Roll-top closure
Shoulder strap
Reflective printing
In stock | 84,95 €
|
![Listaus SwixSkinImpregnationpinnoite 7045952666174 ceafd9cde19338a93f5d5a4234714a80 1[1]](https://www.procycling.sk/uploads/small/listaus-swixskinimpregnationpinnoite-7045952666174-ceafd9cde19338a93f5d5a4234714a80-1-1-.jpg)
![MAT 141 30694 K020[1]](https://www.procycling.sk/uploads/small/mat-141-30694-k020-1-.jpg)
![Fenix ALD 10 0[1]](https://www.procycling.sk/uploads/small/fenix-ald-10-0-1-.jpg)
![Spd70 deaf430f 3727 4fba 8d6f c116c0ccbe25[1]](https://www.procycling.sk/uploads/small/spd70-deaf430f-3727-4fba-8d6f-c116c0ccbe25-1-.jpg)
